CANROYAL SUPER SYNTHETIC GEAR OIL SAE 80W-90

General Information
TYPICAL PROPERTIES

CANROYAL SUPER SYNTHETIC GEAR OIL SAE 80W-90

CANROYAL FULL SYNTHETIC GEAR OIL SAE80W-90

(Automotive Transmission Oils –)

DESCRIPTION

CANROYAL FULL SYNTHETIC GEAR OIL SAE80W-90 is a high performance, synthetic, multi-purpose, automotive gear lubricant designed to help meet the highest-level performance requirements of many modern passenger vehicles in all types of operating conditions, from mild to severe, including limited slip applications, as well as deliver outstanding power transfer performance.

CANROYAL FULL SYNTHETIC GEAR OIL SAE80W-90 is an extreme-pressure lubricant for gear boxes, specially formulated to satisfy the highest service conditions: high speed, shock loads and high torque at low speeds. It is recommended for all hypoid transmissions and is also suitable for spiral Level gear, worm wheels and most transaxles. This high-quality synthetic oil has been developed to provide complete protection and ensures excellent performance of VW manual transmissions, and a precisely balanced additive system that helps to deliver optimized viscosity-temperature properties together with the highest level of inherent formulation stability.

APPLICATIONS

CANROYAL FULL SYNTHETIC GEAR OIL SAE80W-90 is recommended for use in modern high-performance vehicles like sport utility vehicles, vans and light duty trucks requiring performance that require excellent durability. Recommended for many limited slip applications. For certain high-level LS applications, additional limited slip additive may be required if axle chatter is observed. It can also be used in rear axles where API Service GL-4 lubricant is recommended. Not recommended for automatic, manual or semiautomatic transmissions for which engine oil or automatic transmission fluids are recommended.

Product Benefits

Capability to handle some of the severest driving conditions while delivering smooth efficient and reliable performance.
Outstanding protection against low speed/high torque wear and against high speed scoring.
Excellent rust, staining and corrosion protection of copper and its alloys.
Superior wear protection for critical gear components

Helps to retains viscosity and film strength under severe operating conditions to prevent wear.
Helps to maintain film strength for reliable lubrication.
Maintains cleanliness & reduces abrasive wear
Very good wear protection, even under severe load conditions.
High Extreme-Pressure and antiwear performance
Provides smooth shifting operation

Recommendations / Specifications

API GL-5/GL-4, MT-1, MIL-L-2105, MACK GO-J, MAN 341, MB.235.11 and ZF TE –ML-01,02 and 08

Meets or exceeds the quality requirements of numerous vehicle manufacturers such as IVECO, MAN, SCANIA and VOLVO for heavy vehicles rear axles and final drive units.

TYPICAL TECHNICAL PROPERTIES

SAE Grade	Unit	Test Method	Results
Viscosity Grade.		SAE J300	75W-90
Density at 15⁰C,	g/mL	ASTM D4052	0.860
Kinematic Viscosity at 40⁰C	mm²/s	ASTM D445	110
Kinematic Viscosity at 100⁰C	mm²/s	ASTM D445	15.5
Viscosity Index	-	ASTM D2270	150
Flash Point(COC)	°C	ASTM D92	210
Pour Point,	°C	ASTM D97	-39
Brookfield viscosity at -40 °C	mPa.S	ASTM D2983	60,000

Note: These characteristics are typical of current production. While future production will conform to Canroyal’s specification, variations in these

characteristics may occur. Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application

and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact

office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the

environment.