Gear Oil

CANROYAL EP GEAR OIL SAE 90


DESCRIPTION
  • General Information
  • TYPICAL PROPERTIES
CANROYAL EP GEAR OIL SAE 90

DESCRIPTION

CANROYAL EP GEAR OIL SAE 90 API GL-5 is extreme-pressure lubricants for the lubrication of loaded gears for which an API GL-4 level of performance is required. It is suitable for all manual transmissions, transaxles, transfer boxes and steering gears in automotive and agricultural equipment where such an oil is recommended. The advanced product technology offers a long drain interval of 10,000 Km or 1,000 hours.

 

APPLICATIONS

CANROYAL EP GEAR OIL SAE 90 API GL-5 is designed for use in a wide range of gear units with normal bevel or helical gear design including synchronized manual gearboxes, transmissions and axles under moderately severe load and pressure conditions. It is applicable equally for passenger cars, light and heavy trucks, agricultural and building machinery even for topping up well run-in hypoid transmission units.

 

Product Benefits

  • Anti-shudder additive technology
  • Superior thermal stability
  • Longer drain intervals
  • Compatible with all seal and metal types
  • Stable sulfur-phosphorous additivities
  • High safety margin against foaming and corrosion 
  • Superior protection against scoring & spalling wear
  • Maintains cleanliness & reduces abrasive wear
  • Very good wear protection, even under severe load conditions.
  • High Extreme-Pressure and antiwear performance

 

Recommendations / Specifications

API GL-5, GL-4, MIL-L-2105, MAN 341, MB.235.1 and ZF TE –ML-01,02 and 08

Meets or exceeds the quality requirements of numerous vehicle manufacturers such as IVECO, MAN, SCANIA and VOLVO for heavy vehicles rear axles and final drive units.

 

 

 

 

TYPICAL TECHNICAL PROPERTIES

SAE Grade

Unit

Test Method

Results

Viscosity Grade.

 

SAE J300

90

Density at 15⁰C,

g/mL

ASTM D4052

0.900

Kinematic Viscosity at 40⁰C

mm²/s

ASTM D445

145

Kinematic Viscosity at 100⁰C

mm²/s

ASTM D445

14.8

Viscosity Index

-

ASTM D2270

101

Flash Point(COC)

°C

ASTM D92

234

Pour Point,

 °C

ASTM D97

-15

 

 

 

 

 

Note: These characteristics are typical of current production. While future production will conform to Canroyal’s specification, variations in these

characteristics may occur.

Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application

and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact

office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the

environment.

                    

SEND ENQUIRY
Location