Engine Oil

CANROYAL SEMI SYNTHETIC ENGINE OIL SAE 10W-40


DESCRIPTION
  • General Information
  • TYPICAL PROPERTIES
CANROYAL SEMI SYNTHETIC ENGINE OIL SAE 10W-40

DESCRIPTION

Canroyal Semi Synthetic SAE 10W-40 API SN GF-5 are premium high-performance multi-grade engine oils formulated from high quality base oils combined with CHEVRON performance additives to help provide long engine life and providing wide temperature range engine protection. The advanced product technology offers a long drain interval of 7,000 Km to 10,000 Km, and the formulation that helps maximize engine durability.

APPLICATIONS

Canroyal Semi Synthetic SAE 10W-40 API SN GF-5 is a top-tier motor oil designed to lubricate gasoline passenger cars, racing cars, vans, light trucks and 4WD recreational vehicles with exhaust treatment.

Properties

Canroyal Semi Synthetic SAE 10W-40 API SN GF-5 is a high-performance engine oil with low viscosity specifically developed to provide the highest fuel economy and lowest CO2 emissions.

Performance

Longer oil life and lower oil consumption with outstanding protection against wear, rust, corrosion, soot handling and exceptional engine cleanliness.

 

Features and Benefits

•High performance lubricant.

• Outstanding thermal stability and resistance to oxidation, preventing any degradation, even extreme usage conditions.

• Excellent engine protection, particularly against wear of the distribution system.

• Fuel saving because of easy running characteristics.

• Immediate lubrication of all engine components during cold starts, meaning longer engine life.

• Prevention of black sludge creation.

 

 

International Standards

API SN, SM, ILSAC GF-5, GF-4.

ACEA: A3/B3-04, A3/B4-04, C3-08

 

Meets or exceeds

 

 

PORSCHE A40, Opel GM-LL-B-025, Renault RN0700 / RN0710, BMW Longlife-04, VW/Audi 502.00/505.00/505.01, Dexos 1, FIAT 9.55535-S1

Meets quality requirements of most gasoline engine manufacturers in the USA, Europe, Japan and Korea

Typical Properties

Typical Data

Unit

Test Method

Results

Viscosity Grade

 

SAE J300

10W-40

Density at 15⁰C

g/mL

ASTM D4052

0.867

Cold Cranking Viscosity (CCS) at -25⁰C

mPa s

ASTM D5293

7000

Kinematic Viscosity at 40⁰C

mm²/s

ASTM D445

95

Kinematic Viscosity at 100⁰C

mm²/s

ASTM D445

14.3

Viscosity Index

-

ASTM D2270

155

Flash Point

°C

ASTM D92

224

Pour Point

 °C

ASTM D97

-36

Total Base Number

mg KOH/g

ASTM D2896

10.2

 

Note: The information contained herein is subject to change without notification. Typical Properties may vary slightly. 

Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed.  MSDS's are available upon request through your sales contact office, or via the Internet.  This product should not be used for purposes other than its intended use.  If disposing off used product, take care to protect the environment.                                       

SEND ENQUIRY
Location