CANROYAL SEMI SYNTHETIC ENGINE OIL SAE 5W-30

General Information
TYPICAL PROPERTIES

CANROYAL SEMI SYNTHETIC ENGINE OIL SAE 5W-30

DESCRIPTION

CANROYAL SEMI-SYNTHETIC ENGINE OIL SAE 5W-30 API SL, formulated with fully synthetic high-quality base oil in combination with innovative additive technology to provide outstanding characteristics and properties.

APPLICATIONS

Canroyal Semi-Synthetic SAE 5W-30 API SL, is a top-tier motor oil designed to lubricate gasoline passenger cars, racing cars, vans, light trucks and 4WD recreational vehicles with exhaust treatment.

Properties

Canroyal Semi-Synthetic SAE 5W-30 API SL is a high-performance engine oil with low viscosity specifically developed to provide the highest fuel economy and lowest CO2 emissions.

Performance

Longer oil life and lower oil consumption with outstanding protection against wear, rust, corrosion, soot handling and exceptional engine cleanliness.

Features and Benefits

•High performance lubricant.

• Outstanding thermal stability and resistance to oxidation, preventing any degradation, even extreme usage conditions.

• Excellent engine protection, particularly against wear of the distribution system.

• Fuel saving because of easy running characteristics.

• Immediate lubrication of all engine components during cold starts, meaning longer engine life.

• Prevention of black sludge creation.

International Standards

API SL, SJ,

ACEA: A3/B3-04, A3/B4-04, C3-08, GSO-1785/2013

Meets or exceeds

PORSCHE A40, Opel GM-LL-B-025, Renault RN0700 / RN0710, BMW Longlife-04, VW/Audi 502.00/505.00/505.01, Dexos 1, FIAT 9.55535-S1

Meets quality requirements of most gasoline engine manufacturers in the USA, Europe, Japan and Korea

Typical Properties

Typical Data	Unit	Test Method	Results
Viscosity Grade		SAE J300	5W-30
Density at 15⁰C	g/mL	ASTM D4052	0.859
Cold Cranking Viscosity (CCS) at -25⁰C	mPa s	ASTM D5293	6000
Kinematic Viscosity at 40⁰C	mm²/s	ASTM D445	65.1
Kinematic Viscosity at 100⁰C	mm²/s	ASTM D445	11.1
Viscosity Index	-	ASTM D2270	164
Flash Point	°C	ASTM D92	224
Pour Point	°C	ASTM D97	-42
Total Base Number	mg KOH/g	ASTM D2896	10.2

Note: The information contained herein is subject to change without notification. Typical Properties may vary slightly.

Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the environment.